Skip to main content

Transportation

Designed for adventure

YKK Connect Blog - Transportation Fastening Solutions

transportation

Car seats are made up of 3 major components: a frame for support, foam for comfort, and a trim cover for appearance. In general, most YKK® automotive products are used to attach the trim cover to the foam and close out the seat when it is assembled.

Regarding YKK’s tie-down products, we offer QUICKFIT® fastener and EZ-CLIP® fastening clip. Our products offered for seat close out are our 5CH CONCEAL® zipper, 5CI conventional zipper, and ERGO-J® sheet fastener.

Contact YKK

QUICKFIT®

QUICKFIT® fastener, and its counterpart QUICKLOOP® fastener, is a hook to loop fastener used to attach the trim to the foam of a seat. QUICKLOOP® fastener is sewn to the trim cover of a seat, and QUICKFIT® fastener is molded into the trenches of the foam while it is being produced. During seat assembly, the seams of the trim cover are placed in the trenches of the foam and produce the lines you see in a seat.

EZ-CLIP®

EZ-CLIP® fastening clip is another tie-down system that consists of a suspender and clip that is sewn into a trim cover. The suspender itself is attached to the trim cover and has clips attached to the other side of the suspender. The clips then attach to wires that are molded into the foam. These wires are in the trenches of the molded foam, and when the trim is attached to the wires via EZ-CLIP® fastening clip, it also produces the lines you see in a seat.

ERGO-J®

ERGO-J® sheet fastener is YKK’s version of a J-Retainer. J-Retainers are typically used in the process of seat close out. One would normally see them at the bottom of a seat that connect the front surface of a trim cover to the back. ERGO-J® sheet fastener is special because it is designed to make the process of seat close out much easier and a lot less strenuous on the operator. This special design also has appearance benefits and makes it much stronger.

CONCEAL® and conventional zippers

Both YKK® automotive zippers are coil zippers and serve essentially the same purpose. When the trim cover is completely attached to the foam and covering the seat, the last step in completing the seat is the close out of the trim. Both the CONCEAL® and conventional zippers allow for an operator to bring two pieces of the trim cover together and close the seat. The difference between these two zippers is in their appearance. The conventional zipper is just like a zipper you would see on an article of clothing but is much stronger in comparison to these zippers. The CONCEAL® zipper essentially conceals the actual coil and teeth of the zipper by pulling the two pieces of trim together and over itself, making it appear as a sewing seam. It too is much stronger than a zipper on an article of clothing.

Transportation Catalogs

YKK® Fasteners, Snap, and Button Catalog — Industrial

Transportation Products

Find the best product for your transportation application.

FAQs

What zipper should be use for a front seat application, and what part description should be used for ordering purposes?

The CONCEAL® zipper should be used, and the product name is the 5CH chain and slider.

What zipper should be use for a rear seat application?

YKK’s #5 coil zipper should be used for a rear seat application.

What fastening solutions does YKK offer for arm rest and headrest applications?

If a smaller zipper is preferred for armrest and headrest applications, you can use YKK’s 45CF or 3CF zipper.

What type of hook and loop should be used for a seat tie down application?

YKK’s QUICKFIT® Z15-2 hook fastener can be used for straight line tie down applications. YKK’s QUICKFIT FLEX® A2 fastener can be used for curved tie down applications. For loop applications, YKK’s QUICKLOOP® fastener can be used.